Product ID:SILICAP SILICONE RUBBER SEALANT, SIR-111-WHT
MSDS Date:07/01/1988
FSC:8030
NIIN:00N053260
MSDS Number: BVPPT

Emergency Phone: 312-784-5100

Info Phone: 312-784-5100

Cage: 12341

Cage: 63590

ACETOXYSILANE

Fraction By Weight: 5%

OSHA PEL N/K

ACGIH TLV: 10 PPM (MFR)

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:IRRITATES EYES. PROLONGED OR
REPEATED CONTACT MAY IRRITATE SKIN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE O*2/ARTF
RESP) . EYES:FLUSH WITH WATER FOR @ LEAST 15 MINUTES AND SEE A
PHYSICIAN. INGEST:DO NOT INDUCE VOMITING, SEE A PHYSICIAN.
SKIN:WASH WI TH SOAP AND WATER.

Flash Point Method:OC
Flash Point:250F,121C
Extinguishing Media:CARBON DIOXIDE OR FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NOT KNOWN TO SPC TECHNOLOGY.

Spill Release Procedures:USE ABSORBENT MATERIAL TO COLLECT AND CONTAIN
FOR SALVAGE OR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE BELOW 90F/32C. USE REASONABLE
CARE.
Other Precautions:NONE KNOWN TO SPC TECHNOLOGY.

Respiratory Protection:NIOSH/MSHA APPROVED ACID VAPOR TYPE RESPIRATOR.
Ventilation:MECHANICAL (GENERAL):RECOMMENDED.
Protective Gloves:RUBBER OR PLASTIC GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:AS REQUIRED BY COMPANY.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Boiling Pt:B.P. Text:>300F,>149C
Vapor Pres:<5 MM
Spec Gravity:1.05
Evaporation Rate & Reference:<1 (ETHER =1)
Solubility in Water:LESS THAN 0.1%
Appearance and Odor:ACETIC ACID-LIKE, PASTE, VARIOUS
Percent Volatiles by Volume:<5

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL CAN CAUSE A REACTION.
Stability Condition to Avoid:AIR OR MOISTURE CAUSES POLYMERIZATION AND
ACETIC ACID VAPORS ARE FORMED.
Hazardous Decomposition Products:SILICONE DIOXIDE, CARBON DIOXIDE, AND
TRACES OF INCOMPLETELY BURNED CARBON PRODUCTS.

Waste Disposal Methods:SPC TECHNOLOGY SUGGESTS THAT ALL LOCAL, STATE
AND FEDERAL REGULATIONS CONCERNING HEALTH AND POLLUTION BE REVIEWED
TO DETERMINE APPROVED DISPOSAL PROCEDURES. CONTACT SPC TECHNOLOGY
IF THERE ARE ANY DIS POSAL QUESTIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.